Cabinet hanger LIBRA H11 for heavy wall cabinets, load capacity max. 160 kg (per piece)

Cabinet hanger LIBRA H11 for heavy wall cabinets

The cabinet hangers for free-hanging furniture are made entirely of steel, have a high load-bearing capacity and thus guarantee the highest level of security.

The integrated unhooking protection prevents the cabinet from being unintentionally unhooked from the support plate.
After hanging, the red screw is simply screwed in as far as it will go, thus securing the cabinet against unintentional hanging. & Nbsp;
In order to be able to unhook the cabinet again, the screw must first be loosened again. Thanks to the slim side panel, the interior space is used efficiently.

Material: galvanized steel with plastic covers
Surface: optionally white or anthracite
Height adjustment: 12 mm
Depth adjustment: 10 mm
Load capacity: up to 160 kg per piece (depending on the nature of the wall and correct installation!)
Dimensions: see drawings!

Montage:
The support plate is attached to the wall with 2 screws.
(The dowels and screws for the support plate are not included in the scope of delivery because they have to be selected to match the nature of the wall.)
The cabinet hanger is mounted on the inside of the cabinet with 4 Euro screws.
The cabinet can then be hooked into the support plates.
The height and depth of the cabinet can be easily adjusted with the two adjusting screws.
Now all you have to do is screw in the two screws for the locking device and slide the cover caps over the hangers.

Scope of delivery:
1 set