Blum AVENTOS HF SET flap fitting anthracite, for carcase heights from 480 to 900 mm / carcase widths up to 1800 mm

Blum AVENTOS HF flap fitting

The Blum AVENTOS HF flap fitting is ideal for taller wall units, as the two-part front means that little space is required at the top, even for very tall units. Protruding fronts can even be used to create handleless folding lifts with AVENTOS HF.
For wooden fronts and wide aluminum frames, for cabinet heights from 480 to 900 mm and cabinet widths up to 1800 mm.

Advantages:
- Low operating forces
- The handle remains easily accessible in any position by folding up the divided front
- Stepless stop
- Easy tool-free assembly
- 3-dimensionally adjustable front
- Simple, stepless adjustment of the lift mechanism
- Intermediate hinge including finger safety

Important:
For the correct selection of the flap fitting, first calculate the power factor!

The power factor LF is calculated as follows:
Power factor: LF = cabinet height KH (mm) x front weight below and above including handle weight (kg)

theory. Body height (with asymmetrical fronts): TKH = front height above FHo (mm) x 2 (incl. joints)

Optional:
20F2201 - LF 2600-5500/KH 480-570 mm
20F2201 - LF 2600-5500/KH 560-710 mm
20F2201 - LF 2600-5500/KH 700-900 mm
20F2501 - LF 5350-10150/KH 480-570 mm
20F2501 - LF 5350-10150/KH 560-710 mm
20F2501 - LF 5350-10150/KH 700-900 mm
20F2801 - LF 9000-17250/KH 480-570 mm
20F2801 - LF 9000-17250/KH 560-710 mm
20F2801 - LF 9000-17250/KH 700-900 mm

Note on the number of hinges:
2 sets of hinges up to a cabinet width of 1200 mm (included in the set)
3 hinges from a cabinet width of 1200 mm or from a front weight of 12 kg (please order 1 set separately)
4 hinges for a cabinet width of 1800 mm or from a front weight of 20 kg (please order 2 sets separately)

Scope of delivery for the set:
1 complete set Aventos HF flap fitting consisting of:
2 x lift mechanism (left/right) + cover caps (anthracite)
2 x telescopic lever (left / right) + 2 x linear mounting plate
2 x CLIP top 120° hinge + 2 x linear mounting plate
2 x Aventos intermediate hinge (screw version without spring) + 2 x linear mounting plate
10 x chipboard screw Ø 4 x 35 mm

Optional accessories:

Hinge set:
1 x CLIP top 120° hinge + 1 x linear mounting plate
1 x Aventos intermediate hinge (screw version without spring) + 1 x linear mounting plate

Opening angle limiter:
Limits the opening angle to 83°