Handle strip SMAL 146 - 1196 mm Brushed Black TO BE MOLDED IN

Furniture handle SMAL brushed black with harpoon mounting FOR MILLING

This modern profile handle can be mounted horizontally or vertically on almost any furniture front. Thanks to the harpoon bar assembly, no screws are required on either the inside or the outside of your furniture front, which gives your living environment the perfect touch.

Material: aluminium
Surface: black, brushed 0.15mm
Spring thickness: 3 mm ± 0.15mm
Spring height: 10 mm ± 0.2mm
Spring starts at 21 mm from the outer edge of the handle ± 1 mm

Available in the following lengths:
Length: 146 mm / Width: 38 mm / Height: 11 mm
Length: 223 mm / Width: 38 mm / Height: 11 mm
Length: 296 mm / Width: 38 mm / Height: 11 mm
Length: 323 mm / Width: 38 mm / Height: 11 mm
Length: 396 mm / Width: 38 mm / Height: 11 mm
Length: 446 mm / Width: 38 mm / Height: 11 mm
Length: 496 mm / Width: 38 mm / Height: 11 mm
Length: 596 mm / Width: 38 mm / Height: 11 mm
Length: 796 mm / Width: 38 mm / Height: 11 mm
Length: 896 mm / Width: 38 mm / Height: 11 mm
Length: 996 mm / Width: 38 mm / Height: 11 mm
Length: 1196 mm / Width: 38 mm / Height: 11 mm

Harpoon bar assembly FOR FILLING:
An approx. 3.5 mm groove is milled into the upper edge of the drawer front or in the side edge of the cabinet door.
The handle is pressed into this groove together with some wood glue. After the glue has dried, the handle strip is firmly attached to the furniture front.
The width of the groove depends to a large extent on the glue. Please note: If the milling cutter is smaller, the lacquer will tear at the edge of high-gloss lacquered MDF fronts.

Scope of delivery:
1 piece Handle strip