Blum Aventos HS High pivot fitting type D / E / F / I grey

Blum Aventos HS gray swivel fitting 

For cabinet heights of 526 - 800 mm and a front weight of 3 - 21.5 kg
AVENTOS HS is suitable for body widths of up to 1,200 mm

The front swivels elegantly upwards and backwards and is reliably held in any position.
Wall units with side panels or cornices can be used can be easily combined with the AVENTOS fold-up fitting. The flap swings up over the body and leaves enough space for a cornice.

Product properties:

• Ideal for large, one-piece fronts
• Closes gently and quietly, thanks to BLUMOTION
• Little operating forces
• Well-balanced movement comfort with stepless stop
• 3-dimensional front adjustment
• Easy stepless adjustment of the lift mechanism
• The lift mechanism is suitable for Servo-Drive

Aventos HS can be assembled thanks to the tried-and-tested CLIP technology, this can be done almost without tools.

We offer this fitting in 4 different designs on:

• Type D for cabinet heights of 526 - 675 mm and a front weight of 3 - 6.75 kg
  (usually sufficient for 600 mm cabinet widths)
• Type E for cabinet heights from 526 - 6 75 mm and a front weight of 5 - 13 kg
  (usually sufficient for 700 - 1000 mm cabinet widths)
• Type F for cabinet heights from 526 - 675 mm and a front weight of 9.75 - 19 kg
  (usually sufficient for 1000 - 1200 mm cabinet widths)
• Type I for For cabinet heights of 676 - 800 mm and a front weight of 10.5 - 21.5 kg
  (usually sufficient for cabinet widths of 1200 - 1800 mm)

To choose the right one lift mechanism you need the body height and the weight of the front. (You can see the calculation help on the left in the last two pictures)

Important!
A cross-stabilization rod is required for stabilization!

Depending on the cabinet width (KB), we offer different cross stabilization bars in the selection menu. The length of the cross bars vary depending on whether Blum ServoDrive (SD) is used or not.

• For 600 mm cabinet width (KB)
  • without ServoDrive (SD): length 434 mm
  • with ServoDrive (SD): length 399 mm
• for 800 mm cabinet width
  • without ServoDrive (SD): length 634 mm
  • with ServoDrive (SD) : length 599 mm
• for 900 mm cabinet width
  • without ServoDrive (SD): length 734 mm
  • with ServoDrive (SD): length 699 mm
• for 1000 mm cabinet width
  • with ServoDrive (SD): length without ServoDrive (SD): length 834 mm
  • with ServoDrive (SD): length 799 mm
• for 1200 mm cabinet width
  • without ServoDrive (SD): length 1034 mm
  • with ServoDrive (SD): length 999 mm
  • can be adapted to any cabinet width you like

Scope of delivery:
1 complete set Blum Aventos swing-up fitting without stabilizing bar consists of:
- lift mechanism left / right (please select in the selection menu choose the right one)
- 10 chipboard screws Ø 4 x 35 mm
- Lever package 20S3500.05 left / right
- Cover cap set 20S8000 gray left / right
- Front attachment set 20S4200 for wooden fronts and wide aluminum frames
- Installation instructions