Blum Aventos HS Lift-up flap fitting type D / E / F / I anthracite

Blum Aventos HS anthracite swing-up fitting

for cabinet heights of 526 - 800 mm and a front weight of 3 - 21.5 kg
AVENTOS HS is suitable for cabinet widths of up to 1,200 mm

The front swivels elegantly upwards and backwards and is held reliably in any position.
Wall units with side panels or cornices can be easily combined with the AVENTOS fold-up fitting. The flap swings up over the body and leaves enough space for a cornice.

Product features:

• Ideal for large, one-piece fronts
• Closes gently and quiet, thanks to BLUMOTION
• Low operating forces
• Balanced movement comfort with stepless stop
• 3-dimensional front adjustment
• Easy stepless adjustment of the lift mechanism
• The lift mechanism is suitable for Servo-Drive

Thanks to the tried-and-tested CLIP technology, the Aventos HS can be fitted almost without tools.

We offer this fitting in 4 different versions to:

• Type D for cabinet heights of 526 - 675 mm and a front weight of 3 - 6.75 kg
  (usually sufficient for 600 mm cabinet widths )
• Type E for cabinet heights of 526 - 675 mm and a front weight of 5 - 13 kg
  (usually sufficient for 700 - 1000 mm cabinet widths)
• Type F for cabinet heights of 526 - 675 mm and a front weight of 9.75 - 19 kg
  (usually sufficient for cabinet widths of 1000 - 1200 mm)
• Type I for cabinet heights of 676 - 800 mm and a front weight of 10.5 - 21.5 kg
  (usually sufficient for 1200 - 1800 mm cabinet widths)

To select the right lift mechanism you need the cabinet height and the weight of the front . (You can see the calculation help in the last two pictures on the left)

Important!
A cross-stabilization bar is required for stabilization!

Bid depending on the cabinet width (KB). We offer various cross stabilizer bars in the selection menu. The length of the cross bars vary depending on whether Blum ServoDrive (SD) is used or not.

• for 600 mm cabinet width (KB)
  • without ServoDrive (SD): length 434 mm
  • with ServoDrive (SD): length 399 mm
• for 800 mm cabinet width
  • without ServoDrive (SD): length 634 mm
  • with ServoDrive (SD): length 599 mm
• for 900 mm cabinet width
  • without ServoDrive (SD): length 734 mm
  • with ServoDrive (SD): length 699 mm
• for 1000 mm cabinet width
  • with ServoDrive (SD): length without ServoDrive (SD): length 834 mm
  • with ServoDrive (SD): length 799 mm
• for 1200 mm cabinet width
  • without ServoDrive (SD): length 1034 mm
  • with ServoDrive (SD): length 999 mm

Important!
The bars can be adjusted to any cabinet width you like!

Scope of delivery:
1 complete set of Blum Aventos swing-up fittings without cross stabilization bar consists of:
- Lift mechanism left / right (Please select the right one in the selection menu)
- 10 chipboard screws Ø 4 x 35 mm
- Lever package 20S3500.05 left / right
- Cover cap set 20S8000 anthracite left / right
- Front attachment set 20S4200 for wooden fronts and Wide aluminum frames
- Assembly instructions

The crossbar for a cabinet width of 1200 mm cannot be delivered to any DHL ServicePoint!