Blum AVENTOS HK for Tip-On grey High-flap fitting complete set incl. front bracket and cover caps

Blum AVENTOS HK for Tip-On gray flap fitting

The Blum AVENTOS HK lift mechanism for Tip-On is ideal for low cabinet heights in wall cabinets, tall cabinets and/or above the refrigerator.
In combination with TIP-ON (not included), the mechanical opening support from Blum, handle-less fronts open as if by themselves - a simple tap on the furniture door is enough and it opens from the inside yourself.

Features:
- for folding
- well suited for low body heights
- for one-piece wooden flaps
- closes gently and quietly, thanks to BLUMOTION
- Low operating forces when opening and closing
- Simple stepless adjustment of the lift mechanism
- tool-free assembly and disassembly of the front flap
- 3-dimensional front setting
- stepless stop
- no hinges necessary
- Lift mechanism material: steel / cover caps: plastic
- Cover cap colour: grey 
- max. front weight 18 kg (with two lift mechanisms)
- Body height: 205 - 600 mm
- Max. body width: 1800 mm

Power factor (PF) optional:
480 - 1500 (Blum item no. 20K2301T) / opening angle 107°
750 - 2500 (Blum item no. 20K2501T) / opening angle 107°
1500 - 4900 (Blum item no. 20K2701T) / opening angle 107°
3200 - 9000 (Blum item no. 20K2901T) / opening angle 100°

Important: To select the right flap fitting, first calculate the power factor!

Selecting the right lift mechanism set - the performance factor LF is calculated as follows:
Performance factor LF = body height KH (mm) x front weight incl. double handle weight (kg)

For overlapping areas, we recommend the stronger lift mechanism

Note: TIP-ON unit / adapter plate and servo drive unit are not included in the scope of delivery and must be ordered separately.

Scope of delivery:
2x lift mechanisms HK for Tip-On symmetrically (left / right)
6x chipboard screws Ø 4 x 35 mm for lift mechanism
2x front holder 20S4201 without screws
2x cover caps large (left/right)
2x caps small

---

K-Push Push-To-Open door muffler with magnet and counter plate (ejection path: 37 mm) white; for furniture hinges without springs by Italiana Ferramenta

Doors can be opened effortlessly - a light tap is enough. The door is gently pushed open by a spring.

Material: plastic
Colour: anthracite
Ejection path: 37 mm

K-Push with magnetic tip and metal plate for sticking
The integrated magnet in combination with the metal plate glued to the door ensures a closed door with hinges without a spring.
When the door is closed by hand, the plunger is pushed back into the starting position.

You can optionally order the adapter plate, alternatively you can also order a Ø Drill a 10 mm hole in the underbody

Scope of delivery:
1 piece

---

Installation adapter for K-Push push-to-open door dampers for handle-less furniture fronts from Italiana Ferramenta

Doors can be opened effortlessly - a light tap is enough. The door is gently pushed open by a spring.

Material: plastic
Color anthracite

Installation adapter for K-Push door dampers
To accommodate the K-Push opening support in the long version with an ejection path of 37 mm.

Pros:
No drilling necessary! For assembly we recommend chipboard screws with Ø 3.5 x 16mm
The assembly takes place on the inside of the body.

Scope of delivery:
1 piece

---

Blum opening angle limiter

This adapter limits the opening angle of the AVENTOS HK.

Two opening angle limiters are always required.

Optional:
1 piece 75° Adapter (from 107° to 75°) Blum item no. 20K7011
1 piece 100° Adapter (from 107° to 100°) Blum item no. 20K7041