SOTECH UV glue for glass 10g - with or without UV lamp

SOTECH UV adhesive for curing in a few seconds

This UV adhesive is ideally suited for use in the home, electronics, model making or the like. The adhesive can be used for bonding glass and translucent materials.

The adhesive is applied to one side and cures automatically under UV exposure or direct sunlight.

optionally with or without a UV lamp

UV glue
Content: 10 g (depending on the amount applied, sufficient for approx. 0.3 m²)
Colour: transparent, colourless
Resistant to oils, fats and fuels
Hand-tight curing: approx. 20 - 40 seconds (with a UV lamp the time is reduced by approx. 50%)
Final strength after approx. 12 hours
Note: The adhesive can only be easily wiped away with a cloth if it has not been irradiated beforehand.

UV lamp
for accelerated curing of the UV glass adhesive
ideal for hard-to-reach places thanks to its compact design.
For 3 standard AAA batteries (not included)

NOTE:
During processing, the surfaces must be dry and free of dust, grease and other contaminants!

SCOPE OF DELIVERY:
optional
- 1 piece UV glue without UV lamp
- 1 piece of UV glue incl. UV lamp WITHOUT batteries



Hazard warnings:
- H315 Causes skin irritation.
- H317 May cause an allergic skin reaction.
- H319 Causes serious eye irritation.
- H335 May cause respiratory irritation.
- H412 Harmful to aquatic life with long lasting effects.

Safety information:
- P261 Avoid breathing vapors.
- P273 Avoid release to the environment.
- P280 Wear protective gloves.
- P333/P313 If skin irritation or rash occurs: Get medical advice/attention.
- P337/P313 If eye irritation persists: Get medical advice/attention.
- P501 Dispose of contents/container according to official regulations.