Blum Servo-Drive flex Set for refrigerators and dishwashers

Opening the device by simply touching the front, this opens with a plunger stroke, which is attached to the motor and remains open for 2 seconds. During this time, the kitchen user can easily grab the front and open the door completely. In addition, the drive unit has a release safety device that prevents the plunger from running without a piece of furniture being in contact, as well as a leaning protection to prevent accidental opening by leaning avoid.

With the SERVO-DRIVE flex opening support, different installation situations can be implemented with common integrated refrigerators, fridge-freezers, freezers and dishwashers.
 

• Doors of refrigerator and freezer combinations are each equipped with their own SERVO-DRIVE flex unit and can therefore be opened separately.
• Large and heavy doors, e.g. from freezers, open simultaneously and reliably with two synchronized drive units.
• With larger fronts, an optional wireless switch increases the trigger range.
• If SERVO-DRIVE flex is used with integrated dishwashers, the drive unit is mounted in the middle of the built-in niche.

The advantages at a glance:

• Self-closing automatic - if the door is not opened after it has been triggered, the push rod pulls the front closed again.
• Trigger protection - after opening, the plunger retracts into the drive unit and the work area remains free.
• Lean protection - prevents unintentional opening by leaning.
• Flexible areas of application - left or right hinged, trailing or fixed door
• adaptive force setting
• Easy assembly and installation

---

Drive Unit Z10C500A:

---

Technical Details:
Colour: light grey
Length 279mm
Width: 130mm
Height: 59 mm
Total length (incl. head): 316 mm
Type of release: by pressing the front or with the optional wireless switch
Stroke: 46.5mm
Holding time: 2.3 seconds

Scope of delivery:
1 x drive unit
2 x mounting plate
2 x bezel mounts
1 x Aperture Cover
1 x adhesive plate
3 x Blum distance buffers
1 x Connection Node
11 x chipboard screws
1 x assembly jig

---

Power supply unit 16 watts for Blum Servo-Drive Z10NA200

---

for a servo drive in single operation!
The Blum power pack converts the mains voltage into 24V direct current.
Input: 100 - 240 VAC / 50-60Hz / 0.36A
Output: 24VDC / 0.67A

Cable length: approx. 110 cm

Scope of delivery:
1 x power supply incl. operating / assembly instructions

---

Blum radio switch for drive unit 23P5020 SERVO-DRIVE flex and Aventos

---

Can be used for the following servo drive models

• Aventos HK (21KA001)
• Aventos HF/HL/HS (21SA001)
• Servo Drive flex

Characteristics:

• Connects to the engine through the receiver
• Communication between switch and drive unit takes place via radio
• Material: plastic
• Surface: optionally silk white; or grey
• Mounting type: for recessing
• Assembly: Lateral assembly on the body side
• for easy opening of the front
• Design: symmetrical
• Length: 42mm

Scope of delivery:
1 piece

---

Blum Servo-Drive flex radio receiver for fridge, freezer + dishwasher Z10C5007

---

Length 81.9 mm
Width: 27.7mm
Height: 21.75 mm
Type of fastening: plug in
Connects to the motor via the switch
Trigger type: via the optionally available wireless switch 23P5020 (not included in the scope of delivery!)
Installation: simply plug into the Servo-Drive flex drive.

Scope of delivery:
1 piece