1 set of mirror clips for unframed mirrors incl. fixing material

1 set of mirror clips for unframed mirrors including fastening material

With the SOTECH mirror clips, mirrors, pictures on acrylic glass or aluminum Dibond can be mounted safely and easily on the wall. This set contains two brackets without springs for mounting on the bottom edge of the mirror, two brackets with springs for the top edge of the mirror and mounting material. Thanks to the quadruple attachment, the mirror or picture sits firmly in the retaining clips and hangs securely.

The mirror can be removed from the holder again without tools.

Material: Steel
Surface: polished chrome
with cork rings to protect the back of the mirror and for a secure hold
Load capacity: max. 15 kg
Distance to wall: 9 mm
For mirrors, billboards , pictures or signs up to 6 mm thick
Suitable for unframed mirrors
For indoor use

DIMENSIONS:
Mirror clips (without spring):
Height: 28 mm
Width: 24.2 mm
Depth: 15 mm

Mirror clips with spring :
Height: 30.3 mm
Width: 32 mm
Depth: 6.8 mm
Spring range: 0 - 10 mm

ASSEMBLY:
1. Mark the drill holes for the two brackets on the lower edge of the mirror and drill holes with a diameter of 6 mm. The brackets must be aligned exactly horizontally.
2. Install lower brackets
3. Hang mirror
4. Mark the drill holes for the two brackets on the upper edge of the mirror and drill holes with a diameter of 6 mm. The brackets should be parallel to the bottom ones and perfectly level.
5. Mount brackets with springs on top
6. Hang the mirror by pushing the mirror up into the upper brackets as far as it will go. The mirror is then carefully lowered into the lower holder.

It is advisable to place a soft surface, such as large sponges, under the assembly area to set it down. In addition, this assembly should not be carried out near children.

SCOPE OF DELIVERY:
1 set includes
- 2 holders with springs
- 2 holders without spring
- 4 fastening screws (Ø x L) 4 x 40 mm
- 4 Fischer DUO Power S6 (Ø x L) 6 mm x 30 mm dowels (drilling diameter 6 mm)